Developing a conceptual model of marine farming in New Zealand

Survey and Geographic Information System (GIS) data analysis describes the relative influence of biophysical and human variables on site choices made by marine farmers in New Zealand. Community conflicts have grown in importance in determining farm location and different government planning strategies leave distinct signature patterns. Recent legislation empowers local governments to choose among three strategies for future regional aquaculture development. This paper suggests each strategy could result in different spatial outcomes. Simulation modelling of the type described here can provide a better understanding of farmer responses to management approaches and the range of futures that could result from planning choices made today.     

Shock barometry of the Siljan impact structure,Sweden

Abstract– The Siljan impact structure in Sweden is the largest confirmed impact structure in Western Europe. Despite this, the structure has been poorly studied in the past, and detailed studies of shock metamorphic features in the target lithologies are missing. Here, we present the results of a detailed systematic search for shock metamorphic features in quartz grains from 73 sampled localities at Siljan. At 21 localities from an area approximately 20 km in diameter located centrally in the structure, the orientations of 2851 planar deformation feature sets in 1179 quartz grains were measured. Observations of shatter cones outside of the zone with shocked quartz extend the total shocked area to approximately 30 km in diameter. The most strongly shocked samples, recording pressures of up to 20 GPa, occur at the very central part of the structure, and locally in these samples, higher pressures causing melting conditions in the affected rocks were reached. Pressures recorded in the studied samples decrease outwards from the center of the structure, forming roughly circular envelopes around the proposed shock center. Based on the distribution pattern of shocked quartz at Siljan, the original transient cavity can be estimated at approximately 32–38 km in diameter. After correcting for erosion, we conclude that the original rim to rim diameter of the Siljan crater was somewhere in the size range 50–90 km.     

A 3‐D study of mineral inclusions in chromite from ordinary chondrites using synchrotron radiation X‐ray tomographic microscopy—Method and applications

Abstract– A method is described for imaging in 3‐D the interiors of meteoritic chromite grains and their inclusions using synchrotron radiation X‐ray tomographic microscopy. In ordinary chondrites, chromite is the only common mineral that survives long‐term weathering on Earth. Information about the silicate matrix of the original meteorite, however, can be derived from mineral inclusions preserved in the protecting chromite. The inclusions are crucial in the classification of fossil meteorites as well as sediment‐dispersed chromite grains from decomposed meteorites and larger impacts, as these are used for characterizing the past influx of material to Earth, but have previously been difficult to locate. The method is non‐destructive and time efficient for locating inclusions. The method allowed quantitative and morphological studies of both host chromite grains and inclusions in three dimensions. The study of 385 chromite grains from eight chondrites (H4–6, L4–6, LL4, LL6) reveals that inclusions are abundant and equally common in all samples. Almost two‐thirds of all chromite grains contain inclusions, regardless of group and type. The study also shows that the size of the inclusions and the host chromite grains, as well as the number of inclusions, within the host chromite grains vary with petrographic type. Thus, the petrographic type of the host of a suite of chromite grains can be determined based solely on inclusion content. The study also revealed that the amount of fractures in the host chromite can be correlated to previously assigned shock stages for the various chondrites. The study has thus shown that the features and inclusions of fossil chromite grains can give similar information about a former host meteorite as do studies of an unweathered whole meteorite, meaning that this technique is essential in the studies of ancient meteorite flux to Earth.     

Visualization-based analysis of structural and dynamical properties of simulated hydrous silicate melt

We have explored first-principles molecular dynamics simulation data for hydrous MgSiO₃ liquid (with 10 wt% water) to gain insight into its structural and dynamical behavior as a function of pressure (0–150 GPa) and temperature (2,000–6,000 K). By visualizing/analyzing a number of parameters associated with short- and mid-range orders, we have shown that the melt structure changes substantially on compression. The speciation of the water component at low pressures is dominated by the isolated structures (with over 90% hydrogen participated) consisting of hydroxyls, water molecules, O–H–O bridging and four-atom (O–H–O–H and H–O–H–O) groups, where every oxygen atom may be a part of polyhedron or free (i.e., bound to only magnesium atom). Hydroxyls favor polyhedral sites over magnesium sites whereas molecular water is almost entirely bound to magnesium sites, and also interpolyhedral bridging (Si–O–H–O–Si) dominates other types of bridging. Water content is shown to enhance and suppress, respectively, the proportions of hydroxyls and molecular water. As compression increases, these isolated structures increasingly combine with each other to form extended structures involving a total of five or more O and H atoms and also containing threefold coordination species, which together consume over 80% hydrogen at the highest compression studied. Our results show that water lowers the mean coordination numbers of different types including all cation–anion environments. The hydrous melt tends to be more tetrahedrally coordinated but with the Si–Si network being more disrupted compared to the anhydrous melt. Protons increase the content of non-bridging oxygen and decrease the contents of bridging oxygen as well as oxygen triclusters (present at pressures above 10 GPa). The calculated self-diffusion coefficients of all atomic species are enhanced in the presence of water compared to those of the anhydrous melt. This is consistent with the prediction that water depolymerizes the melt structure at all pressures. Our analysis also suggests that proton diffusion involves two processes—the transfer of H atoms (requiring the rupture and formation of O–H bonds) and the motion of hydroxyls as hydrogen carriers (requiring the rupture and formation of Si–O and/or Mg–O bonds). Both the processes are operative at low compression whereas only the first process is operative at high compression.     

EPR investigation of NO2 and CO2 − and other radicals in beryl

A number of different impurities are located in the open channels of natural beryl crystals. The rare Maxixe beryl contains an unusual amount of NO₂. The isoelectronic CO₂ ⁻ radical is found in the irradiated Maxixe-type beryl. The NO₂ radicals are distributed in the Be–Al plane of the crystal, with the nitrogen atom close to the oxygens of the beryl cavity wall. These oxygens repel the negative CO₂ ⁻ radical, which is located at the center of the beryl cavity and rotates around its O–O axis, which is parallel to the crystal c-axis. When there is a nearby alkali ion at the center of the beryl channel, it reorients the CO₂ ⁻ radical so that its bisector is parallel to the c-axis and points toward the positive ion. Different signals are analyzed for Li⁺, Na⁺, and another counter-ion, which probably is Cs⁺. The related NO₃ and CO₃ ⁻ radicals are the color centers in the investigated deep blue beryls. The slow decay of the color, which makes these beryls useless as gem stones, is related to the decay of the hydrogen atoms which are present in these crystals. Evidence is given that NO₃ is created in Maxixe beryl by a natural process, while CO₃ ⁻ in Maxixe-type beryl has been created by irradiation. The temperature dependence of the EPR signals of these two radicals was investigated, but a definitive proof that they rotate at the center of the beryl cavity could not be given. EPR signals from some other radicals in beryl have been observed and described.     

Raman spectroscopic study of PbCO3 at high pressures and temperatures

Cerussite (PbCO₃) has been investigated by high-pressure and high-temperature Raman spectroscopy up to pressures of 17.2 GPa and temperatures of 723 K. Two pressure induced phase transitions were observed at about 8.0(2) and 16.0(2) GPa, respectively. The post-aragonite transition (PbCO₃-II) at 8.0(2) GPa is accompanied by softening of the v ₂-out-of-plane mode of the CO ₃ ^2? group and disappearance of the B_1g (v ₄-in-plane band of the CO ₃ ^2? group) mode. Stronger shifts of the carbonate group modes after the phase transition suggest that the new structure is more compressible. The formation of a second high-pressure polymorph begins at about 10 GPa. It is accompanied by the occurrence of three new bands at different pressures and splitting of the v ₁-symmetric C–O stretching mode of the CO ₃ ^2? group. The transitions are reversible on pressure release. A semi-quantitative phase diagram for PbCO₃ as a function of pressure and temperature is proposed.     

Hydrodynamic Performance of A Porous-Type Land-Fixed Oscillating Water Column Wave Energy Converter

A hybrid, porous breakwater-Oscillating Water Column(OWC) Wave Energy Converter(WEC) system is put forward and its hydrodynamic performance is investigated using the fully nonlinear, open-source computational fluid dynamics(CFD) model, OpenFOAM. The permeable structure is positioned at the weather side of the OWC device and adjoined to its front wall. A numerical modelling approach is employed in which the interstices within the porous structure are explicitly defined. This permits the flow fiel...     

Buried pockmarks on the Top Chalk surface of the Danish North Sea and their potential significance for interpreting palaeocirculation patterns

Three-dimensional (3D) seismic data from the southern Danish North Sea were used to analyse the morphology and spatial distribution of depressions in the Danian Chalk deposit. Previously, these depressions were either interpreted as karst structures or pockmarks. The observed depressions occur in an interval from 25 ms below to 12 ms above the Top Chalk surface. Three types of depressions were differentiated based on their plan-view geometry and their degree of symmetry: Type 1, comprising sub-circular and symmetrical depressions, is the dominant group (ca. 70 %). Type 2, elongated and symmetrical depressions, represents only a small fraction (ca. 5 %). The elongated and asymmetrical depressions of Type 3 compose ca. 25 %. In cross section, each depression type can be either characterised by a V- or a U-shape. The maximum size of the depressions ranges from 50 to 580 m, with an average internal depth of 10 m. We interpret the depressions as pockmarks formed by the expulsion of biogenic or thermogenic fluids at the Danian seafloor. Likely, the initial form of the pockmarks has been circular (Type 1) and was subsequently modified for Types 2 and 3 to an elongated form by currents. The long axis of the pockmarks is interpreted to represent the effective current direction. The inferred direction is sub-parallel to the palaeobathymetric contours. The 3D seismic interpretation of pockmarks presented in this paper contributes to the understanding of fluid migration and palaeocirculation patterns during the sedimentation of the terminal Chalk Group in the southern Danish North Sea.     

Archean to Recent aeolian sand systems and their sedimentary record: Current understanding and future prospects

The sedimentary record of aeolian sand systems extends from the Archean to the Quaternary, yet current understanding of aeolian sedimentary processes and product remains limited. Most preserved aeolian successions represent inland sand‐sea or dunefield (erg) deposits, whereas coastal systems are primarily known from the Cenozoic. The complexity of aeolian sedimentary processes and facies variability are under‐represented and excessively simplified in current facies models, which are not sufficiently refined to reliably account for the complexity inherent in bedform morphology and migratory behaviour, and therefore cannot be used to consistently account for and predict the nature of the preserved sedimentary record in terms of formative processes. Archean and Neoproterozoic aeolian successions remain poorly constrained. Palaeozoic ergs developed and accumulated in relation to the palaeogeographical location of land masses and desert belts. During the Triassic, widespread desert conditions prevailed across much of Europe. During the Jurassic, extensive ergs developed in North America and gave rise to anomalously thick aeolian successions. Cretaceous aeolian successions are widespread in South America, Africa, Asia, and locally in Europe (Spain) and the USA. Several Eocene to Pliocene successions represent the direct precursors to the present‐day systems. Quaternary systems include major sand seas (ergs) in low‐lattitude and mid‐latitude arid regions, Pleistocene carbonate and Holocene–Modern siliciclastic coastal systems. The sedimentary record of most modern aeolian systems remains largely unknown. The majority of palaeoenvironmental reconstructions of aeolian systems envisage transverse dunes, whereas successions representing linear and star dunes remain under‐recognized. Research questions that remain to be answered include: (i) what factors control the preservation potential of different types of aeolian bedforms and what are the characteristics of the deposits of different bedform types that can be used for effective reconstruction of original bedform morphology; (ii) what specific set of controlling conditions allow for sustained bedform climb versus episodic sequence accumulation and preservation; (iii) can sophisticated four‐dimensional models be developed for complex patterns of spatial and temporal transition between different mechanisms of accumulation and preservation; and (iv) is it reasonable to assume that the deposits of preserved aeolian successions necessarily represent an unbiased record of the conditions that prevailed during episodes of Earth history when large‐scale aeolian systems were active, or has the evidence to support the existence of other major desert basins been lost for many periods throughout Earth history?